If your car has problems, especially during the start-up process, you might need a battery replacement. Batteries are one of the most important components of a car. They kickstart the engine and keep the electronics running. They also power the internal climate control features like heating or air conditioning. If any of these features are malfunctioning, you might need to buy a Solite car battery to replace your old one. In this article, we discuss how to check your existing battery and determine whether it needs to be replaced.
- Get the Required Tools
You need the right tools to determine whether your battery is in good shape. The most important tool in your kit is a multimeter. It will you determine how much juice the battery has. There are two types of multimeters available in the market; digital and analog. While the analog one is efficient and provides reliable readings, the digital meter is easier to use and provides more accurate readings. Multimeters are quite affordable and you can easily find them online on at any car battery suppliers near you.
- Locate the Battery
Once you have your multimeter at hand, you need to find the car’s battery. You will need to pop the hood for this. The battery should be located on the right or left the side of the engine, though some car manufacturers do place it at an odd location like under the rear car seat. You can refer to the car’s owner manual to find where the battery is located. Sometimes the component is covered by a plastic cover to protect it from debris.
- Test the Battery
Once you have located the battery, remove its cover and prepare your multimeter. Make sure your car and all of the electronics are switched off. If you’re using the digital multimeter, you need to make sure the knob is turned towards DC voltage. Hold the multimeter’s black wire to the black or negative terminal and the red wire to the red or positive terminal. Make sure you have good contact between the lead tips and the battery terminals.
- Study the Readings
If there’s a stable connection between the battery terminals and leads, you should get a clear read on your multimeter. Here’s what the readings mean:
- If you have more than 12.66 volts, your battery is fully charged.
- If the reading is 12.45, your battery has a 75% charge.
- If the reading is 12.24 volts, your battery is 50% charged.
- If the battery reading is 12.06 volts, it is 25% charged.
- If it is 11.89 volts, it has no charge.
If your battery has 75% charge or higher, there’s nothing wrong with it and you don’t need to replace it. If the charge is anywhere between 75% and 50%, you might still get some use out of the battery but it won’t perform reliably. If the battery is lower than 25%, you need to replace it. It is a good idea to get a reliable one from your local Sebang battery distributor and replace a dead battery quickly.